tank body

It has the advantages that the volume of tank body can be effectively utilized and more meat can be charged into the tank.

更加有效的利用罐体内的容积装入更多的原来肉。

This paper studied the ways and safety measures to use hydraulic controlled blasting to demolish oil tank body under very complicated surrounding environment, accumulating experiences for the hydraulic controlled blasting.

本文研究在周围环境相当复杂的情况下采用水压控制爆破拆除油罐体的方法，安全措施，为今后的水压控制爆破积累了经验。

And therefore, the tank body has the characteristics that the tank body can reduce material thicknesses, and can keep manufacturing yield rate to lower material cost.

借此，使本实用新型具有可以减少材料厚度，可以保持制造良率以降低材料成本的特性。

The exterior of the tank body is provided with an interlayer water jacket provided with a constant temperature heating device and a water inlet and a water outlet valves.

在罐体外部装有夹层水套，水套中装有恒温加热装置，水套上设有进、出水阀。

It is mounted at the tank top body is submerged in the liquid , resulting no pollution.

该泵安装于罐顶,泵壳浸没在罐内液体中不会形成污染.

The opening and closing door is a gate valve or a vertical downward swing door which forms nested connection with the tank body.

启闭门为一闸板阀或者与罐体嵌套连接的竖直下开门。

Panel and tank body design and processing.

面板和箱体的设计与加工。

A Finite Element Analysis for the Tank Body and Frame of a Cement Tanker

水泥罐式汽车的罐体及车架结构的有限元分析

The safety present situation of Normal Pressure Tank Body of Transportation Liquid Dangerous Goods was analyzed. Its basic requests of safety management were proposed also.

对汽车运输液体危险货物常压容器（罐）的安全现状进行了分析，并提出了安全管理工作的基本要求。

The floc storage bin is arranged at the lower part of the tank body and is connected with a floc discharge pipe.

絮体储存仓设在罐体的下部，与排絮管道连接；

The feed inlet of the tank body is provided with a feed inlet valve, and materials falling buffer mechanisms are arranged in the tank body in different heights.

罐体进料口设有进料阀，罐体内不同高度设有物料下落缓冲机构。

The paper introduces all kinds of excellent performances of ECPE ( extended chain polyethylene) fiber reinforced composites, emphasizes their applications in body armour, helmet. armoured vehicle, tank liner, helicopter armour and load-earring member, etc.

概述伸直链聚乙烯纤维增强复合材料的优良性能，着重介绍了它在人体装甲、头盔、装甲车辆、坦克内衬、直升机装甲及承力构件等领域中的应用。

The Relation Between Geometrical Shape of Oil Tank Body and Welding

储油罐体几何形状与焊接的关系

Analysis and calculation of tank body strength in modification of 10.5 ф× 32m seed precipitation tank

Φ10.5×32m种分槽改造槽体强度分析及计算

Research of the characteristic parameters of tank body and support for tank assembly equipment

罐体组对设备中筒体和支撑特征参数的研究

The tank body is designed by means of three-dimensional aid design method with the characteristics of reasonable structure, large effective capacity and reduced transportation cost.

罐体采用计算机三维辅助设计，结构合理，有效容积大，降低运输成本。

The charging device is provided with a conduit which is inserted in the tank body and arranged on the bottom of the tank body.

加料装置设有导管，该导管插设入槽体内并置于槽体底部。

Loads considered in different cases include: the gravity of tank body itself, liquid pressure and gravity, wind, inertial force.

工况中考虑的载荷包括：罐体本身的重力、液体压力及重力、风力、惯性力等。

Stress measuring technique for tank body of liquid asphalt transportation truck

液态沥青运输车罐体应力电测技术

The transport vehicle is composed of a motor-vehicle chassis, a vehicle frame, a tank body, an unloading system, a hydraulic system and a transmission system.

它由汽车底盘、车架、罐体、卸料系统、液压系统和传动系统组成。

The spiral separating plate and the shell of a tank body form a descending spiral channel.

螺旋分离板与罐体外壳构成一下降螺旋通道；

The key technology is that a baffle is transversely mounted in the tank body, and a hand washing baffle is mounted vertically on the baffle.

其关键技术是在箱体内横向安装隔板，在隔板上竖向安装洗手隔板。

Demolish Oil Tank Body by Hydraulic Controlled Blasting

水压控制爆破拆除储油罐体

The spiral conveyor is connected with the tank body by a sealing piece.

螺旋输送器通过密封件连接罐体。

The vent pipe is arranged vertically in the tank body to be used for the ventilation.

所述通风管竖置于所述池体中,用于通风.

The major loads borne on the tank body are analyzed, and stress measurements, from the preparation work to static and dynamic test conditions as well as data processing are presented in this article.

从罐体承受的主要载荷分析、测试前的准备工作到罐体的静、动态试验以及应力电测试验数据处理等都作了简要地介绍。

The cross section of the tank body presents a funnel-shaped inverted pear structure.

罐体的横截面呈漏斗形倒梨状结构。

The utility model is characterized in that a blender is arranged in the tank body.

包括罐体，罐体设有进料口和出料口，其特征在于所述罐体内设有搅拌器。

Safety Management on Normal Pressure Tank Body of Transportation Liquid Dangerous Goods

汽车运输液体危险货物常压容器（罐）的安全管理

A thickener comprises a tank body with a bottom provided with a sand discharge port and a top provided with a feed port;

一种浓密机，包括罐体，所述罐体的底部设置有放砂孔，其顶部设置有进料口；